With up to 60 containers per minute the X5 is the fastest HVAC – welder available today.
With the automatic welder X5 – HVAC a machine has entered the market which can weld exceptional formats, sheet-thickness and materials, thanks to a solid frame-construction and a state of the art control.
The connection-power is an important cost factor, especially when running heavy gauge, galvanized material. Thanks to optimized arrangement of the welding arms (PowerBAR) and the use of a frequency inverter (Pacemaker™), the electric power consumption of this welder is less than 30 Amps per phase at full load and maximum speed!
For most HVAC – applications and rather thin material, 1 copper wire will do the job. However the X5 – HVAC is equipped with all units to handle also 2 copper wires, which is required for heavy gauge material.
Threading 1 or 2 wires in is a “childs play” and only a selector switch has to “activate” the 2nd wire drive, which stands still when unused.
| Diameter range | 80 - 330 mm |
|---|---|
| Height range | 70 - 650 mm |
| Material thickness | 0.4 - 0.6 mm |
| Production output | up to 20 1/min |
| Format change | 30 minutes |
| Height change | 5 minutes |
| Welding speed | 4 - 20 m/min |
| Wire diameter | 2 x 2.0 mm |
| Electrical mains | 3 x 400 VAC + N + Ground, 50 / 60 Hz |
| Fuse and power | 3 x 32 A, 35 kVA |
| Water Pressure | 5 bar (absolute) |
| Flow rate | min. 40 l/min |
| Cooling power | min. 20 kW |
| Air pressure and consumption | 6 bar, 5 m³/h |
