Qualimaker shows strange or unstable graph (I/U-sensor)
Possible cause:
- Check if the voltage pick – up “tongues” are worn.
- Check if there’s enough the “contact pressure” of those tongues or if they are bent. If they are bent; change them, do not attempt to bend them yourself, they might break!
![](https://www.canman.ch/wp-content/uploads/2017/04/qm_scope_002a.jpg)
- Short circuit (see picture/graph beside)
e.g. lower tongue has contact with power window!
- check wire – usually after a short circuit the wire is damaged!
![](https://www.canman.ch/wp-content/uploads/2017/04/qm_faq_002b.jpg)
- Short circuit (see picture/graph beside)
- the wire might be damaged/broken within the Z-rail.
![](https://www.canman.ch/wp-content/uploads/2017/04/qm_faq_002c1.jpg)