The wire continuously runs slow after machine control is ON
The sensors B1 and B2, which are mounted to main machine plate, need to be readjusted.
![](https://www.canman.ch/wp-content/uploads/2017/04/Screen-Shot-2017-04-27-at-10.34.47-AM-300x226.png)
Here you have another viewpoint of the two sensors.
![](https://www.canman.ch/wp-content/uploads/2017/04/Screen-Shot-2017-04-27-at-10.38.41-AM-300x231.png)
The reason, why the wire is still running is, that a distance “x” in the picture is too big. Therefore reduce the clearance for both sensors B1 and B2 too a minimum of 0.1mm.
![](https://www.canman.ch/wp-content/uploads/2017/04/Screen-Shot-2017-04-27-at-10.39.41-AM-300x211.png)