Support

What does this error message mean?
CCD = concurrent connected data variables.

The amount of active CCD is limited. Opening the HMI is using some of the available CCD.
Closing the HMI is releasing the CCD again.
When you repeatedly open and close the browser, the CCD can still be in use and getting into the limitation.
(There is a delay for releasing the CCD when closing the connection).
„If a client wants to subscribe to new data variables while no more CCDs are available, a message “CCD exceeded!” will appear and there will be no communication with these data variables.“
„If a client disconnects from the visu (e.g. browser gets closed), it will take some time until the browser session expires and the CCDs from this client become available once again (session timeout of the scada server: 2 min.).

How to solve a CCD exceeded?

Close alle open browser connection (HMI app) and wait for >2 min.
Now you should be able to open the HMI without error message.

Closing apps on iPads with a home button:

1. Double-click the Home button to show your most recently used apps.
2. Swipe right or left to find the app that you want to close.
3. Swipe up on the app’s preview to close the app.

Closing apps on newer iPads without a home button:

1. From the Home Screen, swipe up from the bottom of the screen and pause in the middle of the screen.
2. Swipe right or left to find the app that you want to close.
3. Swipe up on the app’s preview to close the app.

How to prevent a CCD exceeded?
Don’t open the HMI in several browser simultaneously.
Don’t repeatedly open and close the HMI in short time.
Don’t repeatedly press reload the HMI in short time.

Possible cause:

• LED on the converter does not light up!
  • Lenze frequency converter defect
• If LED is red, check error code with the keypad.

NOTE: In case you have to replace the converter, make sure you load the default parameter setting. All the latest models, do have the parameter setting in the electrical scheme – if you do not have the parameter, contact Can Man by filling out a ticket in the support section on our website.